Refill markers before they dry out completely to maximize life:

• Unscrew the neck of the barrel. You can do this by hand without any ink touching you, or if you prefer you can use the AusPen tool (’spanner’) supplied with every AusPen carry case.
• AusPen Markers are individually wax sealed to ensure they are air locked. This may result in initial tightness of the neck. Subsequent openings are easier.
• Remove only the head and nib of pen, insert 25 to 30 drops of AusPen ink into the felt inside the barrel.
• Replace neck of the barrel firmly.

Avoid contact with fabrics.

Always take care when handling ink, the use of a tissue or rag is recommended.

How to reverse/ replace the nib in an Auspen whiteboard marker

Our nib are reinforced and double sided.

If they worn out you can reverse them, use the other side, and also replace them with a new one!

• Unscrew the neck of the barrel
• Remove the head and nib of pen
• Remove nib and nib holder from the bottom of the housing
• Pull out the nib from the nib holder
• Reverse the nib (or use a new nib) and insert the nib into the nib holder
• Replace the nib holder into the housing
• Re-screw the housing into the neck of the barrel firmly

Always take care when handling ink, the use of a tissue or rag is recommended.